USB/DC Lithium Polymer Battery Charger 5-12V - 3.7/4.2v Cells info
Charge your single-cell lithium ion/polymer battery any which way you like with USB/DC Lithium Polymer Battery Charger 5-12V - 3.7/4.2v Cells. Have a USB connection? No problem, just plug into the miniUSB connector. Only have a wall adapter? Any standard 2.1mm DC adapter which puts out 5 to 12VDC will work fine. If both are plugged in, the charger will automatically choose whichever has the highest voltage.
Other nice things about USB/DC Lithium Polymer Battery Charger 5-12V - 3.7/4.2v Cells include multiple LEDs for power & charging status, including a charging LED which will blink when the battery is full. If the charger gets too hot from high-speed charging, it will slow down the charge rate automatically. You can easily adjust the charge rate up to 1.2A or down to 100mA.
USB/DC Lithium Polymer Battery Charger 5-12V - 3.7/4.2v Cells is for use with Adafruit Lipoly/LiIon batteries only. Other batteries may have different voltage, chemistry, polarity or pinout.
USB/DC Lithium Polymer Battery Charger 5-12V - 3.7/4.2v Cells - General Specifications
- Use USB or DC power - 5 to 12V input
- Charges one single-cell 3.7/4.2v batteries (not for older 3.6/4.1v cells) with constant current/constant voltage
- Three indicator LEDs - green for Power, orange for charging and red for error
- Charging LED will blink when the battery is full
- Thermal protection
- 2 JST connections so you can keep the battery plugged in and powering your project
- Terminal block connections galore just solder in 3.5mm terminal blocks
- Default charge rate is about 500mA, but you can easily change this by soldering in a through-hole resistor on. The chip can do 100-1200 mA charging
- Safety timer will stop charging after about 14 hours
- The chip supports a standard 10K thermistor, which have been stuffed as a standard resistor. You can solder in a thermistor easily
- Fully assembled, tested and comes with a free JST cable
USB/DC Lithium Polymer Battery Charger 5-12V - 3.7/4.2v Cells - Technical Specifications
- Dimensions: 40mm x 44mm x 13mm
- Weight: 11.7g
Videos
Documents
MCP73861 Datasheet
Schematics
References
Adafruit Web Site: https://www.adafruit.com/products/280