TB6612FNG Dual Motor Driver

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91631
Availability: SOLD OUT Views: 17079
Product Description
  • TB6612FNG motor driver chip
  • Can be used to control two DC motors bidirectional and one two polarity stepper motor
  • Compatible with 3.3V and 5V microcontroller systems
  • 1.2A continuous current supply per channel
  • Motor supply voltage up to 13.5V
  • PWM frequency up to 100kHz
$4.50
Qty:
This product has a minimum quantity of 20

Shipping Options to United States

Select Country:
* Region / State:

TB6612FNG Dual Motor Driver info

TB6612FNG Dual Motor Driver is a motor driver breakout board to drive two bidirectional DC motors or a two polarity stepper motor. The board can supply 1.2A continuous current per channel and the maximum current it can supply is 3.2A. Note that maximum current passing over the board may harm it permanently. Since the logic voltage level of the board is between 2.7V and 5.5V, it can be used easily with both microcontrollers with 3.3V and 5V logic voltage levels.

The speeds of motors are controlled via PWM signals and the board supports 100kHz frequency for PWM signals. 13.5V can be applied to the board motor supply voltages.

TB6612FNG Dual Motor Driver is shipped fully assembled. The pin spacing of the board is 0.1’’, so it is compatible with breadboards. For easier use the pins that are used for microcontroller interfacing are positioned in one side of the board and the pins needed to use with motor control is positioned in the other side of the board.

 

TB6612FNG Dual Motor Driver - General Specifications

  • TB6612FNG motor driver chip
  • Can be used to control two DC motors bidirectional and one two polarity stepper motor
  • Compatible with 3.3V and 5V microcontroller systems
  • 1.2A continuous current supply per channel
  • Motor supply voltage up to 13.5V
  • PWM frequency up to 100kHz

 

TB6612FNG Dual Motor Driver - Technical Specifications

  • Motor Voltage: 4.5 – 13.5V
  • Logic Voltage: 2.7V – 5.5V
  • Number of Channels: 2
  • Max Continuous Current per Channel: 1.2A
  • Maximum Current: 3.2A
  • Maximum PWM Frequency: 100kHz

 

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: