Your shopping cart is empty!
Makeblock Socket Cap Screw will be replaced by Button Head Socket Cap Screw gradually, and the tool HEX Screwdriver 3mm will be replaced by HEX Screwdriver 2.5mm. Button Head Socket Cap Screw is a new kind of Socket Cap Screw, it has smaller head that can solve most problem of interfere with other components.
Description:
This Kit contains a Makeblock high torque(15kg.cm) digital servo and 2 servo bracket, with these bracket, it's easy to build a joint for a robot, also there are a lot of ways to conenct the servo with other Makeblock Parts.
Specification:
Mechanical Specification | |
Size | 40×20×41mm |
Weight | 75g |
Gear type | 5 metal gear |
Limit angle | 210°±5° |
Bearing | 2*Bearing |
Horn gear spline | Φ8mm35T |
Horn type | Plastic, POM |
Case | Aluminum alloy+Engineering plastics |
Connector wire | 230mm±5mm |
Motor | Coreless Motor |
Splash water resistance | No |
Electrical Specification | |
Operat voltage | 6.0V |
Idle current | 8mA |
No load speed | 0.19sec/60° |
Runnig current | 450mA |
Peak stall torque | 16.5kg.cm |
Stall current | 2500mA |
Control Specification | |
Command signal | Pulse width modification |
Amplifier type | Digital controller |
Pulse width range | 500-2500usec |
Neutral position | 1500usec |
Running degree | 180°±3°(when 1000~2000usec) |
Dead band width | 5 usec |
Rotating direction | Counterclockwise (when 1000~1500usec) |
Part List:
1x | MECDS-150 Servo Motor |
2x | MECDS-150 Servo Bracket |
8x | Socket Cap Screw M4x8 |
8x | Plastic Ring 4x7x2mm |