Raspberry Pi NTSC/PAL (Television) TFT Display - 3.5" Diagonal

Raspberry Pi NTSC/PAL (Television) TFT Display - 3.5" Diagonal info

Raspberry Pi NTSC/PAL (Television) TFT Display - 3.5" Diagonal is a TFT display that can be used with your Raspberry Pi board. The visible display measures only 3.5" (8.9cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red (+) and black (-) wires, then connect a composite video source to the RCA connectors.

There’s three little buttons that let you enter a menu system for adjusting brightness, color and contrast. The cable has two composite plugs, AV1 and AV2. AV1 is the default.
It will work connected to any analog composite-video output. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.
Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector.

Raspberry Pi NTSC/PAL (Television) TFT Display - 3.5" Diagonal - General Specifications

• 3.5" display
• Menu system
• Two Composite Plugs
• Includes a NTSC/PAL driver board, enclosure and stand.

Raspberry Pi NTSC/PAL (Television) TFT Display - 3.5" Diagonal - Technical Specifications

• Power with 6-12VDC only into onboard buck converter
• 150mA power draw at 12V, 350mA at 6V
• Control board measures 70mm x 52mm x 11.15mm
• Visible display dimensions: 70.08mm horizontal x 52.56mm vertical
• Resolution: 320 RGB wide x 240 high
• Dot pitch: 0.219 mm wide x 0.219 mm high
• Display metal case dimensions: 76.9mm x 63.9mm x 3.3mm
• The display weighs 48 grams.

Videos

Documents

References

Adafruit Web Site: https://www.adafruit.com/products/913