Raspberry Pi NTSC/PAL (Television) TFT Display - 2.5" Diagonal

Raspberry Pi NTSC/PAL (Television) TFT Display - 2.5" Diagonal info

The visible display measures only 2.5" (6.35cm) diagonal, Raspberry Pi NTSC/PAL (Television) TFT Display - 2.5" Diagonal comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. There's one little button to adjust the LED backlight brightness up and down.

It will work connected to any analog composite-video output. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector.

If you received a display where the connector cable has red & black wires going to the composite plug then connect yellow to ground, and white wire to 6-12V

Raspberry Pi NTSC/PAL (Television) TFT Display - 2.5" Diagonal - General Specifications

• 2.5" display
• Adjustable Brightness
• Two Composite Plugs
• Includes a NTSC/PAL driver board

Raspberry Pi NTSC/PAL (Television) TFT Display - 2.5" Diagonal - Technical Specifications

• Power with 6-15VDC only into onboard buck converter
• 80mA power draw at 12V, 150mA at 6V
• Control board measures 47mm x 32mm
• Four 2.2mm drill holes on a 46mm x 39mm square
• Visible display dimensions: 50.4mm horizontal x 37.8mm vertical
• Resolution: 320 RGB wide x 240 high
• Dot pitch: 0.0525mm wide x 0.1575mm high
• Display metal case dimensions: 62 x 45mm x 3 mm

Documents

Adafruit Learn Link: https://learn.adafruit.com/game-grrl

Adafruit Learn Link: https://learn.adafruit.com/using-a-mini-pal-ntsc-display-with-a-raspberry-pi

References

Adafruit Web Site: https://www.adafruit.com/products/912