Raspberry Pi Model B Starter Pack - Doesn't include Raspberry Pi info
Get everything you need to start with the Starter Pack for Raspberry Pi. It's the perfect accompaniment to your new Pi, everything you need to boot up your Pi Model B and get going.
Note: This pack does not include a Raspberry Pi. The pack which includes a Raspberry Pi can be found here.
Raspberry Pi Model B Starter Pack - General Specifications
- Adafruit Pi Case - Keeps your Pi safe, and is compatible with the GPIO cable and cobbler!
- 3' long USB Micro-B Cable - Use this to power the Pi from a computer or the 5V 1A adapter
- 5V 1A power adapter - We had these custom made specifically for use with embedded Linux machines like the Pi. It provides clean 1A minimum with 5.25V to overcome the 0.25V drop of the USB cable
- USB TTL console cable
- 4GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy
- Adafruit Pi Cobbler with GPIO cable - Makes connecting to the GPIO/I2C/SPI/Power pins easy
- Large full-size breadboard - This breadboard has plenty of space for a Cobbler and your circuits, with an adhesive back you can attach it.
- Premium Male/Male Jumper Wires - 20 x 6" (150mm)
- USB Wi-Fi Module
- Embroidered Raspberry Pi badge
- 1x Photo Cell
- 5x 10K 5% 1/4W Resistor
- 5x 560 ohm 5% 1/4W Resistor
- 1x Diffused 10mm Blue LED
- 1x Electrolytic Capacitor - 1.0uF
- 1x Diffused 10mm Red LED
- 1x Diffused 10mm Green LED
- 3x 12mm Tactile Switches
Raspberry Pi Model B Starter Pack - Technical Specifications
Videos
Documents
References
Adafruit Website: http://www.adafruit.com/products/955
