Raspberry Pi - HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL

Raspberry Pi - HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL info

Raspberry Pi - HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL is a 10.1" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. We include a driver board with HDMI, VGA and Composite inputs.

There's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.

Raspberry Pi - HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.

For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to 1280x800 in case it doesn't detect the resolution properly.

For use with a BeagleBone black, we found it works when plugged in, no configuration required.

A power adapter is NOT included.

Raspberry Pi - HDMI 4 Pi - 10.1" Display IPS - HDMI/VGA/NTSC/PAL - General Specifications

• 10.1-inch TFT display
• High resolution and great angle visibility
• Thin, bright and high-res
• Driver board with HDMI, VGA and composite inputs included
• Very easy to use
• Adjustable brightness, color and contrast
• Auto-detects input

Raspberry Pi - HDMI 4 Pi - 10.1" Display IPS - HDMI/VGA/NTSC/PAL - Technical Specifications

• Power with 9-12VDC (recommended)
• 16:10 display ratio
• Resolution: 1200 x 800
• Visible area: 217mm x 135mm 16:10
• Brightness: 350cd/m2
• Contrast: 800:1
• We ship with a an HSD101PWW1 display, or equivalent
• Not HDCP compatible - it cannot be used with 'secured' HDMI sources
• Display dimensions: 220mm x 139mm / 8.7" x 5.5"
• Thickness: 5mm / 0.2"
• Mounting Tab Hole Diameter: range between 2.1mm - 2.9mm / 0.08" - 0.11"
• Bottom Mounting Hole Distance: 62mm / 2.4"
• Top Mounting Hole Distance: 87mm / 3.4"
• Right Side Mounting Hole Distance (closer hole): 125mm / 4.9"
• Right Side Mounting Hole Distance (further hole): 130mm / 5.1"
• Left Side Mounting Hole Distance (closer hole): 118mm / 4.6"
• Left Side Mounting Hole Distance (further hole): 124mm / 4.9"

Videos

Documents

Driver Datasheet

Keyboard Datasheet

References

Adafruit Website: http://www.adafruit.com/products/1287