Raspberry Pi - 10.1" Display & Audio 1280x800 IPS - HDMI/VGA/NTSC/PAL

Raspberry Pi - 10.1" Display & Audio 1280x800 IPS - HDMI/VGA/NTSC/PAL info

Make an audio/video setup with a 10.1" IPS screen with HDMI stereo speaker support. We include a driver board with HDMI, VGA and Composite inputs as well as stereo 4 ohm at 3W output driving capability. There's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.

We include a plug-in cable that connects to the 4 speaker output pins, the pins are labeled LOUT+/- and ROUT+/- you'll have to solder your own speakers to the 4 wires.

Raspberry Pi - 10.1" Display & Audio 1280x800 IPS - HDMI/VGA/NTSC/PAL will work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.

For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to 1280x800 in case it doesn't detect the resolution properly. The easiest way to edit the config.txt is to put the Pi SD card into a computer and edit config.txt with any text editor and save.

For use with a BeagleBone black, we found it works when plugged in, no configuration required.

A power adapter is NOT included. You will need a 9 or 12VDC adapter to power the device.

Raspberry Pi - 10.1" Display & Audio 1280x800 IPS - General Specifications

• 10.1 inch IPS screen with HDMI stereo speaker support.
• 1280x800 px HDMI resolution
• Adjustable brightness, color and contrast.
• Auto-detects input
• Works connected to devices with HDMI, VGS, NTSC/PAL outputs.

Raspberry Pi - 10.1" Display & Audio 1280x800 IPS - Technical Specifications

• Power with 9-12VDC
• 16:10 display ratio
• Resolution: 1200 x 800
• Visible area: 217mm x 135mm 16:10
• Brightness: 350cd/m2
• Contrast: 800:1
• Display dimensions: 230mm x 150 x 5.2 mm
• Not HDCP compatible - it cannot be used with 'secured' HDMI sources

Power draw from combined display+HDMI driver when backlight is on:

• 5V: 980mA (not guaranteed to function at 5V)
• 6V: 780mA (not guaranteed to function at 6V)
• 7V: 660mA
• 8V: 575mA
• 9V: 515mA
• 10V: 450mA
• 11V: 415mA
• 12V: 380mA

Videos

Documents

Driver Datasheet

Keyboard Datasheet

References

Adafruit Website: http://www.adafruit.com/products/1694