QTR-8A Reflectance Sensor Array

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91172
Availability: SOLD OUT Views: 21540
Product Description
  • Line sensor
  • General purpose proximity or reflectance sensor
  • 8 IR emitter and receiver pairs
  • Maximum 6mm sensing range
$9.00
Equivalent Products
  • $ 12.77
    QTR-8RC Reflectance Sensor Array - Digital
  • Qty:

    Shipping Options to United States

    Select Country:
    * Region / State:

    QTR-8A Reflectance Sensor Array info

    QTR-8A Reflectance Sensor Array is intended as a line sensor, but it can be used as a general-purpose proximity or reflectance sensor. The module is a convenient carrier for eight IR emitter and receiver (phototransistor) pairs evenly spaced at intervals of 0.375" (9.525 mm). Each phototransistor is connected to a pull-up resistor to form a voltage divider that produces an analog voltage output between 0 V and VIN (which is typically 5 V) as a function of the reflected IR. Lower output voltage is an indication of greater reflection.

    The outputs are all independent, but the LEDs are arranged in pairs to halve current consumption. The LEDs are controlled by a MOSFET with a gate normally pulled high, allowing the LEDs to be turned off by setting the MOSFET gate to a low voltage. Turning the LEDs off might be advantageous for limiting power consumption when the sensors are not in use or for varying the effective brightness of the LEDs through PWM control.

     

    QTR-8A Reflectance Sensor Array - General Specifications

    • Line sensor
    • General purpose proximity or reflectance sensor
    • 8 IR emitter and receiver pairs
    • Maximum 6mm sensing range

     

    QTR-8A Reflectance Sensor Array - Technical Specifications

    • Dimensions: 2.95" x 0.5" x 0.125" (without header pins installed)
    • Operating voltage: 3.3-5.0 V
    • Supply current: 100 mA
    • Output format: 8 analog voltages
    • Output voltage range: 0 V to supplied voltage
    • Optimal sensing distance: 0.125" (3 mm)
    • Maximum recommended sensing distance: 0.25" (6 mm)
    • Weight without header pins: 0.11 oz (3.09 g)

     

    Videos

     

     

    Documents

    QTR-8A and QTR-8RC Reflectance Sensor Array User’s Guide:

    https://www.pololu.com/docs/0J12

    Pololu QTR Reflectance Sensor Application Note:

    https://www.pololu.com/docs/0J13

    Pololu AVR C/C++ Library User’s Guide:

    https://www.pololu.com/docs/0J20

    Arduino Library for the Pololu QTR Reflectance Sensors:

    https://www.pololu.com/docs/0J19

    Pololu AVR Library Command Reference:

    https://www.pololu.com/docs/0J18

     

    References

    Pololu Web Site: https://www.pololu.com/product/960

    There are no reviews for this product.
    Write a review Your Name:


    Your Review:Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below: