Pololu Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase info
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
Motors like this are especially popular for use in home-built 3D printers and CNC machines.
Under ideal conditions the motor is able to achieve speeds close to 30 cm/s.
Pololu NEMA17 Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev - General Specifications
- 8mm threaded rod as output shaft
- 200 steps per revolution
- 40 µm (1.6 mil) per full step linear step size
- 1.68A current per coil
- 2.8 V voltage rating
- 1.65 Ω resistance per coil
- 3.7kg-cm holding torque
- 3.2mH Inductance per coil
- Output shaft supported by two ball bearings
Pololu NEMA17 Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev - Technical Specifications
- Size: 42.3mm square x 38mm (Not including the shaft)
- NEMA size: 17
- Weight: 385g
- Shaft diameter: 8mm
- Shaft type: 28cm threaded rod
- Steps per revolution: 200
- Current rating: 1680mA per coil
- Voltage rating: 2.8V
- Holding torque: 3.7kg-cm
- Resistance: 1.65 Ω per coil
- Inductance per phase: 3.2mH
- Number of leads: 4
- Lead length: 16cm
Videos
Documents
Datasheet
References
Pololu Website: https://www.pololu.com/product/2268