Pololu Dual VNH3SP30 Motor Driver Carrier MD03A - PL-707

Pololu Dual VNH3SP30 Motor Driver Carrier MD03A - PL-707 info

Pololu Dual VNH3SP30 Motor Driver Carrier is a compact carrier for the VNH3SP30 motor driver integrated circuits from ST. Pololu Dual VNH3SP30 Motor Driver Carrier incorporates most of the components of the typical application diagram of the VNH3SP30 datasheet, including pull-up and current-limiting resistors and a FET for reverse battery protection. To keep the number of I/O lines down, the two enable/diagnostic lines on each chip are tied together. All you need to add is a microcontroller or other control circuit to turn the H-Bridges on and off.

Pololu Dual VNH3SP30 Motor Driver Carrier PCB includes provisions for installing up to three large capacitors to limit disturbances on the main power line. It is generally not necessary to use all three capacitors; two radial capacitors are included with each unit.

Pololu Dual VNH3SP30 Motor Driver Carrier MD03A - General Specifications

• VNH3SP30 motor driver
• 9A continuous current output
• Current limiting resistors
• Reverse battery protection

Pololu Dual VNH3SP30 Motor Driver Carrier MD03A - Technical Specifications

• Motor driver: VNH3SP30
• Motor channels: 2
• Minimum operating voltage: 5.5 V
• Maximum operating voltage: 16 V
• Continuous output current per channel: 9 A
• Peak output current per channel: 30 A
• Continuous paralleled output current: 15 A
• Maximum PWM frequency: 10 kHz

Videos

Documents

VNH3SP30 motor driver datasheet

IRFR3707Z MOSFET datasheet

STD60NF3LL MOSFET datasheet

References

Pololu Web Site: https://www.pololu.com/product/707