Pololu DRV8833 Dual Motor Driver Carrier

Pololu DRV8833 Dual Motor Driver Carrier info

About the Product

Texas Instruments’ DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. Pololu DRV8833 Dual Motor Driver Carrier ships populated with SMD components, including the DRV8833 and adds a FET for reverse battery protection.

Product Description

• Dual-H-bridge motor driver
• Can drive two DC motors or one bipolar stepper motor
• Operating voltage: 2.7‌‌ V to 10.8 V
• Output current: 1.2 A continuous (2 A peak) per motor
• Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor
• Inputs are 3V- and 5V-compatible
• Under-voltage lockout and protection against over-current and over-temperature
• Reverse-voltage protection circuit

Technical Specifications

• Motor driver: DRV8833
• Motor channels: 2
• Minimum operating voltage: 2.7 V
• Maximum operating voltage: 10.8 V
• Continuous output current per channel: 1.2 A
• Peak output current per channel: 2 A
• Continuous paralleled output current: 2.4 A
• Size: 0.5″ × 0.8″
• Weight: 1.0 g

Videos

Documents

Texas Instruments DRV8833 motor driver datasheet

References

Pololu Web Site:

https://www.pololu.com/product/2130