Pololu A4988 Stepper Motor Driver Carrier with Voltage Regulators - PL-1183

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91238
Availability: SOLD OUT Views: 23064
Product Description
  • Integrated voltage regulator
  • Simple step and direction control interface
  • Five different step resolutions
  • Adjustable current control lets you set the maximum current output with a potentiometer
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
  • Short-to-ground and shorted-load protection
$8.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Pololu A4988 Stepper Motor Driver Carrier with Voltage Regulators - PL-1183 info

About the Product

 

Pololu A4988 Stepper Motor Driver Carrier is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with current limiting and overcurrent protection. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. The board has a simple step and direction control interface and five different step resolution which are full-step, half-step, quarter-step, eighth-step, and sixteenth step. Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates. Pololu A4988 Stepper Motor Driver Carrier has reverse power protection on the main power input and built-in 5 V and 3.3 V voltage regulators that eliminate the need for separate logic and motor supplies and let you control the driver with microcontrollers powered at 5 V or 3.3 V.

 

Product Description

 

  • Integrated voltage regulator
  • Simple step and direction control interface
  • Five different step resolutions
  • Adjustable current control lets you set the maximum current output with a potentiometer
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
  • Short-to-ground and shorted-load protection

 

Technical Specifications

 

  • Minimum operating voltage: 8 V
  • Maximum operating voltage: 35 V
  • Continuous current per phase: 1 A
  • Maximum current per phase: 2 A
  • Minimum logic voltage: 3 V
  • Maximum logic voltage: 5.5 V
  • Microstep resolutions: 1, 1/2, 1/4, 1/8, 1/16
  • Size: 0.7″ × 1.4″
  • Weight: 3.3 g

 

Videos

 

 

Documents

 

Allegro A4988 stepper motor driver datasheet

 

Heatsinking an A4988/A4983 stepper motor driver carrier

 

References

 

Pololu Web Site:

https://www.pololu.com/product/1183

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: