Pololu 100:1 Micro Metal Gearmotor HP - PL-1101

Pololu 100:1 Micro Metal Gearmotor HP - PL-1101 info

About the Product

Pololu 100:1 Micro Metal Gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 100:1 metal gearbox. These units have a 9.2mm (0.365") long, 3 mm-diameter D-shaped output shaft.

Pololu 100:1 Micro Metal Gearmotor is intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.

Product Details

• 100:1 gear ratio
• 3 mm shaft diameter
• 320rpm free run speed
• 80mA free run current
• 1600mA stall current
• 2.2kg.cm stall torque

Technical Specifications

• Size: 24x.10x12 mm
• Weight: 9.6g
• Shaft diameter: 3 mm
• Gear ratio: 100.37:1
• Free-run speed @ 6V: 320 rpm
• Free-run current @ 6V: 80 mA
• Stall current @ 6V: 1600 mA
• Stall torque @ 6V: 2.16kg.cm

Videos

Documents

References

Pololu Website:

https://www.pololu.com/product/1101/