Pololu 10:1 Micro Metal Gearmotor HP - PL-999

Pololu 10:1 Micro Metal Gearmotor HP - PL-999 info

About the Product

Pololu 10:1 Micro Metal Gearmotor HP is intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. All of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.

Product Description

• 9.96:1 gear ratio
• 3 mm shaft diameter
• 3000rpm free run speed
• 120mA free run current
• 1600mA stall current
• 0.3kg.cm stall torque

Technical Specifications

• Size: 24 x 10 x 12 mm
• Weight: 9.6g
• Shaft diameter: 3 mm
• Gear ratio: 9.96:1
• Free-run speed @ 6V: 3000 rpm
• Free-run current @ 6V: 120 mA
• Stall current @ 6V: 1600 mA
• Stall torque @ 6V: 0.3kg.cm

Videos

Documents

References

Pololu Web Site:

https://www.pololu.com/product/999