OO-KUMA Elite PLA Skin 1.75mm Filament

OO-KUMA Elite PLA Skin 1.75mm Filament info

OO-KUMA Elite PLA Skin 1.75mm Filament from 3D printing material manufacturer Oo-Kuma provides minimal warping, good flowability. The filament is known for its enhanced mechanical toughness and dimensional stability.

Elite PLA Filaments have excellent inter-layer bonding while it is still pretty easy to remove supports. These filaments are tested by most of the 3D printers found in the market like, Up!, Makerbot, Ultimaker, Solidoodle, Leapfrog, Zortrax, Kemiq, etc.

Heatbed usage is not necessary with Oo-Kuma Elite PLA filaments, but a heatbed of 50-60°C can be used if required. The filament can be used with 195-215°C extruders. The spool size is 750g

OO-KUMA Elite PLA Skin 1.75mm Filament - General Specifications

• Skin 1,75mm PLA filament
• Heatbed usage not necessary (50-60°C if required)
• 195-215°C extruder temperature
• 750g spool size
• Minimal warping
• Good flowability
• Excellent inter-layer bonding
• Easy to remove supports

OO-KUMA Elite PLA Skin 1.75mm Filament - Technical Specifications

Physical:

• Specific Gravity: 1,24g/cm³

Mechanical:

• Tensile Strength (at yield): 110MPa
• Elongation (at break): 100%
• Tensile Modulus: 3309MPa
• Spencer Impact: 2,5 Joules

Thermal:

• Melting Point: 210+-6 °C

Videos

Documents

Oo-Kuma Elite PLA Datasheet

References

Oo-Kuma Product Page: http://www.oo-kuma.com/store/p114/Elite_PLA_Skin.html