Infrared Led Board for Raspberry Camera (Pair)

Infrared Led Board for Raspberry Camera (Pair) info

With the Raspberry Pi Camera + Infrared LED Module you can add the night vision feature of Raspberry Pi 2 / B + / A + / B card. With the 2W 3W Infrared Led module shipped with the Camera Module, you can add night vision to the Camera Module and shoot nightly photo and video. Camera Module; Since NOIR produced by Raspberry is compatible with the camera, you can use all the applications for NOIR with this camera module.
 
Infrared LED Modules are fully automatic. When the ambient light level falls below the reference value you set with the potentiometer on the modules, the LEDs are automatically activated and the normal shooting turns into night mode shooting.

Package Included:

• RPi Camera x 1
• Infrared Led Module x 2
• 15-pin FFC Cable x 1

 
Camera Features:

• Compatible with all Raspberry Models
• 5 megapixel OV5647 sensor
• CCD size: 1/4 inch
• Camera operating voltage is 3-5V.
• Aperture (F): 1.8
• Focus: 3.6mm
• Diagonal: 75.7 degrees
• Best Resolution of the Sensor: 1080p
• Camera flat cable supports 60V.
• Dimensions: 25mm x 24mm

 
Infrared LED Module Features:

• 3W high power infrared led
• Built-in photoresistor, ambient light sensor
• Built-in potentiometer for ambient light reference value setting

 
Use of:
The led modules are fixed with the help of screws. Led modules take over the screws at the required power.
The reference value is set with the potentiometer.
 
Note:
It is recommended to use 2 or more adapters together with Raspberry because 2 led modules need 6W total power. It is recommended to use with a cooler or a fan as the time may cause the raspberry to overheat in the regulator part.
The ideal imaging distance is 3 meters.